Butane for THC and CBD Extraction Trend Requires Some Simple Steps to Stay Safe

On May 17^th, 2020, twelve firefighters were injured after an explosion occurred at a facility where butane is used for cannabis extraction. It is not yet known if butane was the cause of the explosion but, it was reported that, butane canisters where found in and around the building. The investigation is ongoing.

According to a Politico article, following an uptick in explosions in Colorado, fire officials there persuaded the National Fire Protection Association, which establishes a fire code for the whole country, to amend its rules to address hazards at facilities that grow and extract marijuana. The revised code requires any hazardous extraction process to be performed in a non-combustible room, in a building that contains no child or health care facilities. Staff must be trained on safe operation of the extraction equipment, and the extraction room must be equipped with a gas detection system and multiple fire extinguishing systems.

Extraction

Extraction is a process by which desired chemical compounds are extracted and separated from the cannabis plant. Extraction strips the plant of essential oils, including CBD, THC, and terpenes (aromatic oils that give cannabis plants their distinctive scents). The extracted oils can be utilized in vape pens, edibles, capsules, tinctures, and topical solutions.

Butane is one technique used to separate essential oils from the plant material. The use of butane for extraction is popular owing, in large part, to the relatively low overhead costs, efficiency (including the wide variety of products that can be created from a single extraction, without the need for further refinement), and high product quality associated with this technique. For instance, the low boiling point of butaneallow extractors to remove the desired compounds without risking evaporation of, or damage to, the delicate and heat-sensitive cannabinoids and terpenes. Moreover, the low boiling point makes it relatively easy to purge any residual butaneat the end of the extraction process, leaving behind only a relatively pure product.

Gas Detection Monitors Can Protect Extractors and Their Employees

While butane is important for extracting essential oils from cannabis plants use of this gas is not without risk, since extraction facility personnel and property are exposed to potential leaks from gas supply lines and storage containers. Butane is highly flammable and explosive gas as well.  Absent appropriate gas monitoring, an explosion can occur if butane vapors are ignited by a spark, heat, or open flame.

Proper gas detection equipment should be placed where the cannabis extraction process takes place, as well as in butane storage rooms, and in any other site where butanemay be expected to accumulate. The gas detection equipment should include the capacity to activate visual and audible alarms, stopping the flow of gas and turning on the ventilation system.

PureAire Monitors

PureAire Monitoring Systems has safety monitors to meet the needs of cannabis extractors using butane. Extractors utilizing butane rely on PureAire’s LEL, explosion-proof, combustible gas monitors. The monitor is housed in a NEMA 4 enclosure specifically designed to prevent an explosion. The durable, long-life LEL catalytic sensor will last 5+ years without needing to be replaced.

PureAire monitors feature an easy to read screen, which displays current oxygen levels for at-a-glance observation by employees, who derive peace of mind from the monitor’s presence and reliable performance. In the event of a gas leak, PureAire’s monitors will set off alarms, complete with horns and flashing lights, alerting personnel to evacuate the area. At the same time, the monitors can be programmed to turn off the flow of butaneand turn on the ventilation system.

In short, PureAire’s monitors enable cannabis extractors, in a cost-effective manner, to preserve both the quality of their products and the well-being of their employees.

 

Nitrogen Blanketing

Overview

Nitrogen (N2) blanketing is a process by which nitrogen is added to fill the headspace (the area between the fill line of a tank’s contents and the top of the storage vessel) to eliminate oxygen and moisture from storage tanks. Nitrogen is commonly used to blanket due to its extremely low reactivity with other substances, as well as its availability and relatively low cost. Other gases can also be used; however, some may be more reactive, and the costs higher,than nitrogen.

Why Blanket with Nitrogen?

Many industries, including oil, gas, and ethanol refineries, as well as chemical, pharmaceutical, and food processors, use nitrogen blanketing to prevent fires and explosions, and to preserve product quality.

Nitrogen blanketing can protect facilities from potentially catastrophic accidents when manufacturing combustibleand explosive chemicals, such as ethanol and other volatile materials, since removing oxygen eliminates the possibility of a fire and/or an explosion. Moreover, tank blanketing with nitrogen prevents oxygen, water, and other unwanted substances from coming into contact with the contents of the storage tanks, and/or causing undo wear of the tanks themselves, as oxygen and moisture inside storage tanks can cause evaporation and corrosion that may result in structural damage to the tanks.

Cooking oil processorstypically blanket with N2 to remove oxygen, which could otherwise oxidize the contents and negatively affect the tasteand,might decrease the shelf life of the oils.

Monitoring Mitigates Risks in Nitrogen Blanketing

Depending upon the needs of the facility and the type of tank, nitrogen is commonly supplied by one of the following methods: continuous purge (a constant flow of nitrogen), pressure control (N2 is added to maintain a set pressure within the tank), and concentration control.

The concentration control methodworks by using an oxygen detection monitor, in conjunction with a nitrogen generator, to continuously measure the level of oxygen inside the storage tank, and, if necessary,owing to elevated oxygen levels, add nitrogen to eliminate excess oxygen in the tank.
To ensure facility safety, protect personnel, and preserve the integrity of the tanks’ contents while blanketing with nitrogen, employees in facilities utilizing concentration control must maintain proper oxygen levels within storage tanks, as too much oxygen can cause an explosion.

Proper oxygen monitoring equipmentshould be placed inside storage tanks to measure and control oxygen levels.  Oxygen monitors should also be placed in any area where nitrogen is stored or used. Further, the O2 detection equipment should be capable of activating visual and audible alarms and, in the event of a nitrogen leak, stop the flow of nitrogen.

The same property–oxygen displacement –that makes nitrogen blanketing such a valuable process,can be deadly if nitrogen leaks from the supply lines or storage containers. Employees could suffocate from breathing oxygen-deficient air and, since N2 lacks color, and odor, there is no way, absent appropriate monitoring, to determine if there has been a leak.

PureAire Monitors

PureAire Monitoring Systems’ Explosion-Proof Oxygen Deficiency Monitor is perfect for facilities that use inert gases including, but not limited to, nitrogen, helium, and argon. The enclosure is specifically designed to prevent ignition of an explosion. The monitor is well suited for environments such as ethanol refineries, chemical manufactures, corn and grain processing facilities, powder coatingplants, and the oil and gas industry, where combustible materials, dust, and ignitable fibers are present.

The Explosion-Proof Oxygen Monitor’s built-in pump continuously samples oxygen levels from up to 100 feet away, making it ideal for use with storage tanks, confined spaces, and other hard to reach areas where oxygen monitoring is essential.

The monitor constantly measures changes in oxygen levels and can be programmed to control the flow of nitrogen as needed to ensure safe blanketing.  Additionally, should oxygen levels outside the storage tank drop to an OSHA action level,PureAire’s monitor will set off alarms, complete with horns and flashing lights, alerting personnel to evacuate the area.

The monitor will remain accurate at temperatures as low as -40C. PureAire’s durable, non-depleting, zirconium oxide sensor will last up to 10+ years in a normal environment without needing to be replaced.PureAire oxygen monitors measure oxygen 24/7, with no time-consuming maintenance or calibration required.

In short, PureAire’s Explosion-Proof Oxygen Monitor enablesoil, gas, and ethanol refineries, food processors, and other industries blanketing with nitrogen, to preserve, in a cost-effective manner, the well-being of their employees, the integrity of their products and safety of their facilities.

Overview

On January 31, 2020, the Secretary of Health and Human Services (“HHS”) declared a public health emergency related to the COVID-19 pandemic. Shortly thereafter, hand sanitizer began to disappear from U.S. retailers’ shelves, as anxious consumers (and, unfortunately, opportunistic hoarders and resellers as well) swept up all available stock. In the ensuing months, traditional hand sanitizer producers have found it impossible to keep up with the greatly elevated demand for their products, which are now considered indispensable items in efforts to control the pandemic’s spread.

Seeking to address the supply-demand imbalance currently existing within the hand sanitizer industry, the Food and Drug Administration (“FDA”) issued several industry guidance documents in March of this year (with updates later that month and in April) permitting, within specified parameters, entities not previously engaged in sanitizer manufacturing to produce, on a temporary basis (i.e., for the duration of the public health emergency declaredby the HHS Secretary in January of this year) either alcohol-based sanitizers themselves or the ethanol typically used a s a key pharmaceutical ingredient in such sanitizers.

The industry guidance documents (all of which can be found on the FDA’s website and should be read in their entirety) contemplate that such new, albeit temporary, producers of hand sanitizers (or ethanol for hand sanitizers) might include pharmacists/drug compounders and alcohol production firms (that is, distillers of alcoholic spirits for human consumption), as well as certain other businesses capable of meeting the FDA’s stringent conditions regarding hand sanitizer ingredients and manufacturing processes, as well as its registration and product listing requirements.

Since the FDA first issued its industry guidance documents in March, numerous entities and individuals have begun production of hand sanitizers (or ethanol for hand sanitizers) to address the supply gap resulting from the COVID-19 pandemic. New (albeit temporary) industry participants include manufacturing enterprises, licensed pharmacists, and distillers of alcoholic beverages. Reportedly, over 200 American distilleries (which, obviously, have deep experience in working with ethanol) have registered their facilities with the FDA pursuant to the relevant industry guidance documents.

Ethanol(a/k/a Ethyl Alcohol)

Ethanol is a clear, colorless, and (according to most people) relatively pleasant-smelling liquid made from a variety of feedstocks, including grains and crops high in sugar content, such as sorghum, corn, barley, sugar beets, and sugar cane. While it may be best known as the alcohol found in alcoholic beverages, when ethanol has been denatured (that is, made unfit for human consumption by adding certain other chemicals to it, which also make the odor unappealing), it also has many other commercial applications, including as a fuel additive, industrial solvent, key component of cosmetics and personal care items, and as the active pharmaceutical ingredient in certain disinfecting products, including hand sanitizers.

Keeping Safe While Working with Ethanol

Ethanol is highly combustible, with a low flash point, making leaks (including vapor emissions) potentially quite dangerous, and threats from accidental ignition very serious indeed. To detect, and protect against, risks emanating from leaks or excessive concentrations of ethanol, best practices include placing gas detection monitors, containing visual and audible alarms, in areas where ethanol is used or stored.

PureAireMonitors

PureAire Monitoring Systems’Combustible Gas Monitor (LEL) offers continuous readings of ethanol (and can also be programed to detectisopropyl alcohol, ethane, ethylene, and methyl alcohol). The monitor features an easy to read screen, which displays current ethanol levels for at-a-glance observation by employees, who derive peace of mind from the monitor’s presence and reliable performance. In the event of a leak or buildup of gas to an unsafe level, the monitor will set off an alarm, complete with horns and flashing lights, alerting personnel to evacuate the area. At the same time, the monitor can be programmed to turn on the ventilation system.

PureAire’s Combustible GasMonitor (LEL) is housed in a NEMA 4 explosion proof enclosure suitable for Class1, groups B, C, and D.The enclosure is specifically designed to prevent an explosion. The monitor is well suited for facilities that produce alcohol-based hand sanitizers, as well as alcohol distilleries, ethanol refineries, chemical plants, and any location where monitoring is required for combustible gases.

PureAire’s durable, long-life LEL catalytic sensor will last 5-6 years in a normal environment without needing to be replaced.

Sterilizing and Reusing N95 Respirators

Overview
Personal protection equipment (“PPE”)includes the gloves, gowns, N95 respiratory masks, and other items required by doctors, nurses, andother healthcare personnelresponsible for treating patients, including those suffering from infectious diseases.  As has become evident in the current COVID-19 emergency affecting the globe, during a crisis, these critical items may not always be available in the quantities needed to meet the challenge of treating large numbers of sick people.

Among the most sought after PPE items today are N95 respirators. According to the U.S. Food and Drug Administration (“FDA”), N95 respirators are essential gear to protect the wearer from airborne particles and to keep liquid materials from contaminating the wearer’s face. Now, more than ever, there is a need for readily available, sterile N95 respirators.

Challenge/Solution
Thus far, during the COVID-19 pandemic, we have witnessed a desperate struggle by public and private sector entities to keep up with the huge increasein N95 respirator usage which, in turn, has at times left healthcare workers and other front-line personnel without the equipment necessary to safely do their jobs. Traditionally, N95 respirators have been discarded after a single use and, while on-shore production has recently ramped up, demand for the masks far outstrips supply during the present period in which the number of COVID-19 cases surges daily.

Fortunately, as medical providers and first responders scramble to procure the safety products required to attend to the patients in their care, businesses are innovating to meet the significant challenge posed by the current respirator supply/demand mismatch.

For instance, in late March of 2020, Battelle, a Columbus, OH-based nonprofit research and development firm, received FDA approval for its Critical Care Decontamination System (“CCDS”) process for decontaminating, on a very large scale, the N95 face masks used by healthcare providers. The CCDS process involves pumping concentrated hydrogen peroxide vapor (H₂O₂) into so-called decontamination chambers (20-foot shipping containers fitted with racks on which the N95 masks are hung) for a 2 ½ hour decontamination cycle. So long as the masks have not been heavily soiled, the CCDS process will allow each N95 respirator to be sterilized and reused up to 20 times. The system is highly scalable, and Battelle, which intends to deploy CCDS as needed throughout the U.S., believes that its larger versions should be capable of sterilizing up to 80,000 N95 masks per day.

Additionally, in early April, the FDA granted STERIS, another Ohio-based company, an Emergency Use Authorization (“EUA”) to begin, on a temporary basis, small-scale N95 sterilization, pursuant to which certain of the company’s V-PRO Low Temperature Sterilization System machines are approved to sterilize up to 10 masks apiece per 28 minute vaporized hydrogen peroxide sterilization cycle. STERIS reportedly has 100 such V-PRO machines across the State of Ohio which have the capacity to sterilize N95 respirators as provided for in the EUA, and each re-sterilized mask is reusable up to 10 times by repeating the V-PRO process.

Hydrogen Peroxide Vapor
Hydrogen peroxide vapor (“H₂O₂”)is a widely used gaseous sterilant that has been shown to be effective in killing viruses, fungi, bacteria, and other pathogens, and H₂O₂ decontamination is a standard process used in pharmaceutical, research, and medical facilities.H₂O₂ vapor works by breaking apart the outer membranes of the pathogen to which it is applied, thereby destroying thedangerous microorganism.

Hydrogen peroxide is a colorless gas with a sharp odor. Exposure to H₂O₂ can irritate the eyes, nose, throat and skin, as well as cause headaches, dizziness, nausea, and vomiting. Long-term exposure can negatively affect the lungs, producing coughing and shortness of breath, and elevated levels of hydrogen peroxide may result in a build-up of fluid in the lungs (a dangerous condition known as pulmonary edema). The current OSHA permissible exposure limit (PEL) standard is 1 part of hydrogen peroxide parts per million(ppm).

Gas Detection is Crucial for Personnel Safety
Facilities using concentrated hydrogen peroxide vapor to decontaminate PPE or other medical equipment needto ensure that employees are not exposed to H₂O₂ at levels greater than OSHA’s PEL of 1ppm. Since it is always present, the odor from H₂O₂ vapor does not provide warning that hazardous H₂O₂ concentrations may exist. Therefore, in the absence of appropriate monitoring, it is impossible to determine whether hydrogen peroxide concentrations are approaching dangerous levels.

Best practices call for installation of hydrogen peroxide monitors anywhere H₂O₂ is stored or used.

PureAire Monitors

PureAire Monitoring Systems’ Universal Gas Detectors use “smart” sensor cell technology to continuously track levels of ammonia, bromine, hydrogen, hydrogen chloride, and other toxic gases, including hydrogen peroxide. The sensor cell is programmed to monitor for a specific gas and measurement range, as required by the user.

PureAire’s Universal Gas Detectors allow operators of medical decontamination facilities and systems to detect elevated hydrogen peroxide levels before employee health is put at risk. In the event that H₂O₂ is elevated to an unsafe level, the Universal Gas Detector will set off an alarm that includes horns and flashing lights, alerting staff to vacate the affected area.

The Universal Gas Detector’s easy to read screen makes it simple for employees to monitor hydrogen peroxide levels at a glance, providing them with the assurance that their health is not jeopardized while they perform their important work.

Protecting Precious Cargo: Safety Monitoring at IVF and Cryogenic Facilities

Overview

In March 2018, at two separate fertility clinics, one in Clevelandand the other in San Francisco, the cryogenic tanks storing eggs and embryos malfunctioned, resulting in devastating losses for couples hoping to conceive children.

Nationwide, as of December 2019, there were more than 440 sites that store embryos or eggs in specialized storage tanks of liquid nitrogen, but there are no national laws--and few state standards--governing how, or for how long, the reproductive materials contained therein must be stored.

Publicized failures that have caused the destruction of over 4000 patient eggs, embryos, sperm, and reproductive tissue have heightened the awareness of patients, laboratories, and storage entities to the potential risks and liabilities of cryostorage.

In recent years, as certain health plans and insurance companieshave increased coverage offertility treatments, more couples have turned to fertility clinics to improve their chances of starting families.

How Oxygen Monitors Protect IVF and Cryogenic Facilities 

Wherever liquid nitrogen (LN₂) is used, there are risks associated with nitrogen leaks. Nitrogen displaces oxygen, and a leak deprives the air of oxygen, thereby creating a potential health hazard for storage facility staff. When there is not enough oxygen in the air, persons working in the area can become disoriented, lose consciousness,or even suffocate due to the lack of oxygen. Since nitrogen lacks color and odor, there is no way for employees to detect a leak using the senses. Moreover, a nitrogen leak could lead to failure of the cryopreservation tanks storing genetic materials. In order to ensure the safety of employees, and the viability of the materials, in vitro fertilization (IVF) and cryopreservation facilities rely on oxygen monitors.

According to the National Center for Biotechnology Information, facilities using liquid nitrogen should implement a series of quality control steps to monitor LN₂ levels and refill tanks as necessary for proper cryostorage maintenance. Among the recommendations is the installation of oxygen monitors to avert or minimize the effects of potentially serious cryostorage accidents caused by LN₂ leaks.

PureAire Oxygen Monitors

PureAire Monitoring Systems’ oxygen monitors continually sample the air, taking periodic readings of current oxygen levels. PureAire oxygen monitors are ideally suited for use in acryogenic storage facility, because the monitors can withstand temperatures as low as -40C.

In the event of a nitrogen leak, and a decrease in oxygen to a pre-set alarm level, thePureAire monitor’s built-in horn will sound, and lights will begin to flash, thereby providing notification to the facility staff of the possible impending danger to the precious stored materials. The same alert enables employees to take care of their own personal safety, including exiting the area, if necessary.

Best practice calls for oxygen monitors to be placed wherever nitrogen is used or stored.
PureAire Monitoring Systems monitors feature long-lasting zirconium sensors, which are designed to provide accurate readings, without calibration, for up to 10 years. Cryogenic facilities appreciate the ease of use and reliability of PureAire Monitoring Systems products.

Consumers Have No Beef Eating Plant-Based Meats

Overview
How about meat without involving animals? Move over, veggie burgers; food companies such as Beyond Meat and Impossible Foods, among others, have created plant-based meats that smell, taste, and look (imagine a thick, juicy hamburger) like the real thing. Unlike traditional veggie burgers, made from soy and bean paste, which have been marketed primarily to vegetarians, these companies are wooing and winning over a new group of customer-so-called “flexitarians”- consumers who do eat (or, at least, desire the taste and texture of) meat but, for health or sustainability reasons, want to reduce their meat consumption. According to Barclays Investment Bank, roughly one-third of Americans, or 100 million people, follow a flexitarian diet and that number is expected to rise.

Plant-Based Burgers
Impossible Foods, which makes the Impossible Burger, and Beyond Meat, the company responsible for the Beyond Burger, are perhaps the most well-known producers of meats whose ingredients are derived from plants. Although their ingredients and manufacturing processes are not identical, both companies seek to replicate the essential qualities of a hamburger derived from cows: texture (Impossible and Beyond both utilize various plant proteins); fat/marbling (both companies use coconut oil, as well as other cooking oils); coloring (Impossible relies on soy leghemoglobin, or “heme”, while Beyond uses beet and apple extracts); and flavor (both use natural flavors, and the “heme” that Impossible uses for color also enhances the flavor profile of its products.

Growing Availability and Popularity of Plant-Based Meats
For an industry that barely existed five years ago, the plant-based meat sector is experiencing spectacular growth, and over 50,000 grocery stores and restaurants, including Safeway, Whole Foods, Burger King, Subway, White Castle, KFC, and Carl’s Jr., now carry products from Beyond Meat or Impossible Foods.

And burgers are not the only choice when it comes to plant-based meats. Other options include chicken, pork, and sausages. In August of 2019, after a successful trial run in New York City, Dunkin’ Donuts announced it was rolling out a breakfast sandwich made with Beyond Meat sausages in 9,000 of its stores. Likewise, after selling out of the new plant-based Beyond Fried Chicken in Atlanta, KFC is introducing the product at other locations throughout the South.

According to the Good Food Institute, the value of the U.S. plant-based meat market was $801 Million for the year ending April 2019. Furthermore, investment firm UBS projects growth of plant-based protein and meat alternatives to increase from $4.6 billion in 2018 to $85 billion in 2030.

Gas Usage in Facilities Producing Plant-Based Meats
Food safety compliance is critically important in the food industry and, to continue to grow their sales and increase market acceptance, producers must ensure that their plant-based meats are as safe to consume as non-plant-based meats. Safety requirements dictate that plant-based hamburger, sausage, chicken, and other products be rapidly chilled and/or frozen during the production process and before they can be shipped to restaurant or grocery outlets. As such, modern freezing technology, including the use of tunnel freezers, is essential to the ongoing success of the plant-based meat industry.

Tunnel freezers work by rapidly freezing foods using cryogenic gases, such as liquid nitrogen (LN2) or carbon dioxide (CO2). The food items are placed on a conveyor belt, which carries them into the freezer, where an injection system (utilizing either liquid nitrogen or carbon dioxide), together with fans circulating the gas-chilled air, ensures that all food products are quickly and evenly frozen.

Oxygen Monitors Can Improve Safety in Plant-Based Food Manufacturing

While the use of liquid nitrogen and/or carbon dioxide is important in the production of plant-based meats, it is not without risk. LN2 and CO2 are both oxygen depleting gases, and oxygen deprivation could put employees in real danger if there are gas leaks from freezer supply lines or exhaust systems, or from on-site gas storage containers. In the event of a leak, plant personnel could become disoriented, lose consciousness, or even suffocate from breathing oxygen-deficient air. Since LN2 and CO2 are both colorless and odorless, workers would, in the absence of appropriate monitoring, have no way of knowing that there has in fact been a leak. By utilizing a top-quality oxygen monitor, safety and production personnel can track oxygen levels and detect leaks before workers’ health is jeopardized.

PureAire Water-Resistant Dual O2/CO2 Monitors
PureAire Monitoring Systems’ water-resistant dual oxygen/carbon dioxide monitors offer thorough air monitoring, with no time-consuming maintenance or calibration required. A screen displays current oxygen and carbon dioxide levels, for at-a-glance reading by employees, who derive peace of mind from the monitor’s presence and reliable performance. In the event of a nitrogen or carbon dioxide leak, and a decrease in oxygen to an unsafe level, the monitor will set off an alarm, complete with horns and lights, alerting personnel to evacuate the area.

PureAire’s dual oxygen/carbon dioxide monitor is housed in an IP67 water resistant enclosure that will keep the electronics dry during wash-downs, and the monitor will remain accurate at extremely low temperatures. That makes it ideally suited for environments, such as plant-based food processing facilitiesthat use liquid nitrogen and carbon dioxide. Built with zirconium oxide sensor cells and non-dispersive infrared sensor (NDIR) cells to ensure longevity, PureAire’s water-resistant dual O2/CO2 monitors can last, trouble-free, for over 10 years under normal operating conditions.

Cannabis Extraction Safety

In 1996, California passed Proposition 215, making it the first of many states to ultimately legalize medical cannabis; as of January 2020, an additional 32 states and the District of Columbia have also made medical cannabis legal. Additionally, recreational use of cannabis is now legal in 11 states and is decriminalized in many others. Cannabis legalization and decriminalization have made cannabidiol (“CBD”, a non-psychoactive compound found in cannabis), and tetrahydrocannabinol(“THC”, the chemical responsible for most of cannabis' mind-altering effects), available to both recreational users and patients seeking treatment for such health issues as arthritis, anxiety, inflammation, seizure disorders, and nausea.

Since California’s groundbreaking move in 1996, medical and recreational cannabis has become a significant and rapidly growing industry. According to DC-based cannabis researcher, New Frontier Data, legal cannabis sales in the U.S. are expected to reach $30 billion annually by 2025. The industry growth has led to a substantial increase in grow rooms, medical dispensaries and other retail outlets, and extraction facilities.

Extraction
Extraction is a process by which desired chemical compounds are extracted and separated from the cannabis plant. Extraction strips the plant of essential oils, including CBD, THC, and terpenes (aromatic oils that give cannabis plants their distinctive scents). The extracted oils can be utilized in vape pens, edibles, capsules, tinctures, and topical solutions. Based on the end product, various techniques can be used for extracting the oils, including carbon dioxide (CO2) extraction and hydrocarbon solvent extraction (using solvents such as butane or propane).

Carbon Dioxide Extraction
Carbon dioxide, high pressure, and heat can be combined to create a “supercritical fluid” that extracts cannabis components from the plant. The CO2 extraction method generally produces high yields with relatively little waste. Temperatures and pressures can be adjusted to create multiple products including vaporizer oils; dabbing concentrates such as so-called waxes, crumble, shatters, and saps; and distillates (cannabis extracts that have been further purified and processed to separate and isolate the various cannabinoids, which include CBD and THC). Because CO2 evaporates on its own, many in the medical products and food and beverage industries find the CO2 extraction method appealing, since no residual carbon dioxide remains in the final manufactured product.

Hydrocarbon Solvents Extraction
Hydrocarbon extraction typically uses organic solvents such as butane and propane to separate essential oils from the plant material. The use of hydrocarbons for extraction is popular owing, in large part, to the relatively low overhead costs, efficiency (including the wide variety of products that can be created from a single extraction, without the need for further refinement), and high product quality associated with this technique. For instance, the low boiling point of butane, and even lower boiling point of propane, allow extractors to remove the desired compounds without risking evaporation of, or damage to, the delicate and heat-sensitive cannabinoids and terpenes. Moreover, their low boiling points makes it relatively easy to purge any residual butane or propane at the end of the extraction process, leaving behind only a relatively pure product.

Oxygen Monitors Can Protect Extractors and Their Employees
 While CO2 and hydrocarbon solvents are important techniques for extracting essential oils from cannabis plants use of these gases is not without risk, since extraction facility personnel and property are exposed to potential leaks from gas supply lines and storage containers.

Carbon dioxide is an oxygen-depleting gas that is both odorless and colorless. As such, absent appropriate monitoring to detect that a leak has occurred, extraction employees could become dizzy, lose consciousness, and even suffocate from breathing oxygen-deficient air. Hydrocarbons such as butane and propane also deplete oxygen and, they are flammable and explosive as well.

Proper gas detection equipment should be placed where the cannabis extraction process takes place, as well as in CO2 and hydrocarbon storage rooms, and in any other site where CO2, butane, and propane may be expected to accumulate. The gas detection equipment should include the capacity to activate visual and audible alarms, stopping the flow of gas and turning on the ventilation system.

PureAire Monitors

PureAire Monitoring Systems has safety monitors to meet the needs of cannabis extractors, whether they use CO2 or hydrocarbon solvents.

For facilities using carbon dioxide to extract their products, PureAire’s line of dual oxygen/carbon dioxide monitors offer thorough air monitoring, with no time-consuming maintenance or calibration required. The O2/CO2 monitor comes with user-adjustable alarm setpoints for both oxygen and carbon dioxide. The monitor is built with zirconium oxide sensor cells and non-dispersive infrared sensor (NDIR)cells, to ensure longevity.PureAire’s O2/CO2 monitors can last, trouble-free, for over 10 years under normal operating conditions.

Extractors utilizing hydrocarbon solvents, such as butane or propane, rely on PureAire’s LEL, explosion-proof, combustible gas monitors. The monitor is housed in a NEMA 4 enclosure specifically designed to prevent an explosion. The durable, long-life LEL catalytic sensor will last 5+ years without needing to be replaced.

PureAire monitors feature an easy to read screen, which displays current oxygen levels for at-a-glance observation by employees, who derive peace of mind from the monitor’s presence and reliable performance. In the event of a gas leak, or a drop in oxygen to an unsafe OSHA action level, PureAire’s monitors will set off alarms, complete with horns and flashing lights, alerting personnel to evacuate the area. At the same time, the monitors can be programmed to turn off the flow of gas (CO2, butane, or propane, as appropriate), and turn on the ventilation system.

In short, PureAire’s monitors enable cannabis extractors, in a cost-effective manner, to preserve both the quality of their products and the well-being of their employees.