Storing Liquid Nitrogen in Laboratories: Which Safety Precautions and Sensors Will Protect your Employees?

https://www.pureairemonitoring.com/

Liquid nitrogen is frequently used in scientific research, chemistry classes, and even culinary arts nowadays. The substance is safe when properly stored, and as long as everyone follows safety protocols while handling the liquid nitrogen. As part of an environmental health and safety review (EHS review), learn safety considerations regarding storing liquid nitrogen in the lab setting. 

EHS Review: Understand Liquid Nitrogen Risks

Liquid nitrogen is known for its cryogenic properties. It can freeze things incredibly quickly. This property also applies to people, so staff must take safety precautions when handling liquid nitrogen. Even seconds of exposure can damage skin and eye tissue, and may cause frostbite. 

Staff should never transport liquid nitrogen in open containers. They should never reach directly into vats of the substance. 

The main health risk with liquid nitrogen occurs when the liquid vaporizes into gas, which happens if it leaks into the atmosphere. Nitrogen expands in volume when it turns into gas, and depletes oxygen from the air. The gas has no odor or color, so there is no way staff can tell a leak has occurred without an alarm system. If a nitrogen leak occurs, oxygen levels will fall below safe thresholds. This causes severe cognitive and respiratory problems, as well as death by asphyxiation. 

Liquid nitrogen, like other cryogenic liquids, needs a pressure-relief valve during storage. Without such a valve, internal pressure could cause the storage tank to explode. Liquid nitrogen should be stored in a room that has proper ventilation as a precaution around leaks. If a leak occurs, the ventilation system can help shunt gases outdoors, protecting the health of workers. 

How to Protect Your Employees' Environmental Health and Safety With an Oxygen Monitor 

Facilities must install, calibrate, and maintain oxygen sensors to comply with safety policies regarding the storage of liquid nitrogen in the lab setting. These units act as a secondary precaution against the dangers of a nitrogen leak. An oxygen deficiency monitor or O2 sensor measures the levels of oxygen in the environment at all times. These devices provide labs with a cost-effective and reliable way to make sure there are no leaks in nitrogen storage areas. 

For safety precautions, install one oxygen deficiency monitor anywhere liquid nitrogen is stored, handled, or used. These monitors mount to the wall quickly and provide continuous sampling of oxygen levels. As long as there is no leak, and the room contains enough oxygen, the monitors stay silent. If nitrogen leaked it would cause a decline in oxygen levels, eventually triggering an alarm and flashing light. The oxygen monitor would provide enough time for anyone working in the area to vacate the premises and avoid being harmed or killed. 

While there are several styles of O2 sensor on the market, those from PureAire are preferred for their high quality and cost efficiency. PureAire's O2 sensors feature zirconium, which lasts for 10+ years on average with no maintenance and no calibration. Once the monitor in installed, there's nothing more that needs to be done. Since PureAire's oxygen monitors are reliable once installed, and require less maintenance than the competition, they make it easier and cheaper for labs to protect worker safety. Learn more about PureAire's products by visiting www.pureairemonitoring.com.

Titanium Demand on Rise for Additive Manufacturing Printing: How it’s Made? Titanium Plasma Atomization

                                                                                                                                      Link to oxygen sensors
Plasma atomization is used in many applications, including 3D printing. First developed in 1998, this technique has risen to become the industry standard process for creating reactive metal powders suitable for 3D printing. Learn how plasma atomization works and why you need an oxygen monitor to stay safe with plasma atomization. 

How Plasma Atomization Works

Plasma atomization is used not only in 3D printing, but in any circumstance where powder metallurgy is needed. Other uses include spray coating, cold spray, and metal injection molding. 
To pulverize metal, wire is fed through a tube, then hit by three plasma torches capable of reaching temperatures of 10,000 degrees Celsius. As the wire liquefies and melts, individual droplets shear off and fall into a chamber filled with argon gas and cooled by water. When the drops of metal hit the argon, they solidify into spherical droplets. This process produces a fine, uniform metal powder. After the wire has been transformed into droplets, the powder is sieved to ensure uniformity. This is key to the success of the 3D printing process, which relies upon fine grade, uniform powder. 

Titanium (Ti), Nitinol, Niobium, Aluminum, and other reactive metals and their alloys can all successfully be atomized through this process. Variables in the plasma atomization process allow workers to create droplets of different sizes, for different end uses.  

PureAire offers an oxygen analyzer, which many 3D printing manufacturers utilize. This device helps monitor the levels of oxygen in ppm, from 0 to 1000, while the atomization process takes place. 
It's important to keep oxygen levels low while the Ti and other base metals are being turned into powder, as this ensures the purity of the final product. Oxygen analyzers provide a continuous readout of oxygen levels inside the chamber, so your workers can ensure the highest levels of purity at a glance. 

Argon gas is used during plasma atomization because it helps ensure the purity of the powdered metal by reducing the chance for chemical reactions that might happen if oxygen interacted with the metal during the atomization. As long as the argon gas remains in the chamber where the aluminum or titanium powder is being made, plasma atomization is quite safe. Like other inert gases, argon depletes oxygen from the atmosphere. Were the argon gas to leak out of the plasma atomization chamber, employees' wellbeing could be at risk. 

Why You Need an Oxygen Monitor with Plasma Atomization

When argon escapes into the environment, it displaces oxygen molecules. Since the gas is both odorless and colorless, there is no way to detect an argon leak by sight or smell. If there are several atomization stations creating Ti or titanium powder at once, the risk increases exponentially. 
Once oxygen levels begin to drop, worker safety becomes a concern. If oxygen levels fall below the minimum set by OSHA, workers can suffer respiratory and cognitive impairment. Symptoms include dizziness, confusion, fatigue, and shortness of breath. Even a brief exposure to an oxygen deficient environment can prove deadly. 

Fortunately, an oxygen deficiency monitor can continually weigh oxygen present in the room, alerting staff before oxygen levels plunge below the OSHA threshold. This provides sufficient notification via flashing lights and loud alarms for staff to exit the room to safety. 

PureAire offers an oxygen monitor with a zirconium sensor. Unlike other sensors, this lasts with no maintenance and no calibration once the O₂ monitor is installed. The O₂ monitor and oxygen analyzer, when used together, allow for precise manufacturing of powdered metals with low risk to workers. Businesses prefer PureAire products, which are low-maintenance, cost-effective, and reliable for 10+ years. Visit www.pureairemonitoring.com to learn more about our oxygen analyzers and monitors. 

 

University Environmental Health & Safety Departments: Handling Compressed Nitrogen and Cryogenics

*Click here for oxygen monitor details

An explosion at a university research lab in Hawaii last year highlights the dangers of working with compressed gas and the need for safety equipment on campus. Learn the dangers of working with compressed gas, how an oxygen deficiency monitor can help, and campus safety best practices. 

Compressed Gas on Campus: Uses and Dangers

Compressed gases including nitrogen, argon, and oxygen are widely used on campuses. These gases have many practical and educational uses across educational institutions. While the level of risk varies across schools, a few examples will illustrate the benefits and the risks of using compressed gas on campus.

Argon gas is critical in the 3D printing process, which campus design, fine arts, applied arts, and sciences may use. Culinary programs may use liquid nitrogen for cooking and freezing, and chemistry labs may use N2 as well. Autoclaves, which sterilize equipment, are regularly used in scientific, medical, and industrial programs. Sports programs and physical therapy training programs may use cryotherapy for injury recovery. Cryotherapy chambers rely on nitrogen to chill the air. The chambers can turn deadly if a nitrogen leak occurs. These gases may be used by facilities personnel, researchers, faculty members or teaching assistants and students assisting with teaching labs. No matter which gas students are working with, they are at risk if the gas is not handled, used, stored, or transported properly. 

As these few examples illustrate, there are many opportunities for dangerous leaks, explosions, or fires on campus if safety protocol isn't followed. Many schools find the gases are not properly stored, which leaves everyone on campus in danger. A recent safety bulletin from the University of Rochester found that liquid nitrogen was stored without an oxygen sensor, poisonous gas was used with a fume hood that did not adequately vent hazardous fumes, gas cylinders were modified using unacceptable materials, and gas tanks were stored without protective chains, stands, and gas caps. 

Why Schools and Universities Need an O₂ Monitor 

As the incident in the Hawaiian university lab illustrates clearly, compressed gases pose significant health risks in the university setting. Whenever safety protocol is not followed, the tanks are at greater risk of tipping, falling over, or leaking. 

While the lab worker escaped with her life, many others have not been so lucky. A nitrogen (N₂) gas leak causes death via asphyxiation in a matter of minutes. 

Nitrogen gas is both odorless and colorless. If gas leaks from a canister, there is no way for passerby to tell. As the gas leaks, it lowers ambient oxygen levels below safe thresholds. When levels of oxygen in the air fall below 16 percent, people can experience adverse health affects. Additionally, university property can be damaged by fires or explosions. 

All it takes it a couple of breaths of oxygen-deficient air for symptoms including confusion, dizziness, fatigue, muscular aches, lack of consciousness, and even death. 

Given the clear dangers that these gases pose, universities and schools must take steps to protect their students and staff. Fortunately, there is an easy and cost-effective way to detect gas leaks and alert everyone before oxygen is depleted from the air: Installing an O₂ monitor. 

An O₂ monitor, also called an O₂ deficiency monitor, measures levels of oxygen in the air all the time. As long as the air has adequate oxygen, the monitor will stay silent. When levels fall below safe thresholds, the oxygen deficiency monitor will flash lights and sound an alarm. This way, everyone in the vicinity of the leak can escape without suffering adverse health effects. 

An O₂ deficiency monitor should be installed anywhere that these gases are used or stored. Universities and schools may wish to equip labs, storage facilities, equipment rooms, and hallways or corridors that connect storage rooms with labs or classrooms where the gas is used. 

PureAire offers robust oxygen deficiency monitors that feature best in class construction. Made with zirconium oxide sensors, these monitors offer 10 or more years of maintenance-free performance once installed. These monitors can detect leaks of gases including argon, nitrogen, and helium. View PureAire's line of oxygen deficiency monitors at www.pureairemonitoring.com.
 

http://cen.acs.org/articles/94/web/2016/04/Spark-pressure-gauge-caused-University.html

Nitrogen Refrigerated Trucks a New Trend? An Alternative to Diesel Powered Refrigeration

Nitrogen Truck Refrigeration

Thanks to technological innovations, the food distribution industry has a greener way to protect refrigerated food during transit: Nitrogen refrigeration. The existing system relies on diesel-powdered mechanical refrigeration units. Although these units are effective, they release significant levels of noise and air pollution. While the new innovations decrease emissions to safeguard the environment, there is a hidden health risk transportation companies must take into account. 

How Liquid Nitrogen Refrigeration Works

The new system uses a liquid nitrogen system to cryogenically chill food. A storage tank mounted underneath the truck can be easily refilled when empty. Since the tank is stored outside the truck, the liquid nitrogen never comes into direct contact with the food.

To cool the refrigerated container, liquid nitrogen first passes through a heat exchanger. As the nitrogen moves through the heat exchanger, it evaporates. High-powered fans inside the container circulate the chilled air through the compartment, helping keep all food safely chilled below the temperature danger zone. 

The traditional mechanical refrigeration system emits significant noise while in operation. Even when the truck itself is off, the refrigeration unit can cause as much as 80 dB of noise, which is roughly as much noise as a busy urban environment. This noise level exceeds the typical noise pollution levels in cities, thus limiting the hours when truckers can make deliveries. Additional downsides to the mechanical refrigeration system include reliance on harmful refrigeration chemicals and expensive maintenance and repair costs. 

In contrast, the liquid nitrogen system falls beneath the noise pollution thresholds, so deliveries can be made at any time. This benefits both truckers and restaurants, grocery stores, and other businesses who may want to accept deliveries outside of business hours. 

The liquid nitrogen system, or N₂ system, also reduces carbon dioxide emissions significantly and does not use harmful refrigerants to keep food cool. Transportation companies who want to green their image or offer their clients increased flexibility will enjoy the liquid nitrogen refrigerant system for these reasons. 

While the cryogenic system reduces costs and pollution associated with mechanical refrigeration, the N2 system is not perfect. Liquid nitrogen does pose a safety risk if it comes into contact with the food or the environment. If a truck rollover accident caused a nitrogen spill, for example, individual health and environmental dangers abound. 

If the nitrogen gas seeps into the load chamber in the accident, it could turn the truck chamber into an oxygen deficient environment. Staff who opened the truck chamber to check on their load could become dizzy, pass out, and die within minutes of entering the oxygen deficient space. 

The liquid nitrogen itself has cryogenic properties, which is why it's been used to freeze off cancerous cells and warts. A worker cleaning up the spill must take precautions to avoid getting liquid nitrogen on their skin. In a worst-case scenario, an employee could lose a finger if it was immersed in liquid nitrogen. 

How to Safeguard Truckers Against Liquid Nitrogen Dangers

An O₂ deficiency monitor, also called an oxygen monitor, can protect employees from the dangers posed by liquid nitrogen. These monitors continually measure the amount of oxygen in the load chamber. When the cryogenic system is working properly, oxygen will naturally remain at safe levels and the alarm will stay silent yet vigilant. In the event that nitrogen gas leaks into the load chamber -- due to a system malfunction or an accident - oxygen levels will start dropping. Once the environmental oxygen levels falls below OSHA thresholds, the oxygen monitor will flash and sound an alarm. This notifies staff that safety hazards exist, so they will not open the load chamber and enter an oxygen deficient environment. 

Since staff can succumb to asphyxiation within minutes, the O₂ deficiency monitor is necessary to monitor system performance and keep employees safe if anything goes wrong. Since nitrogen is invisible and odorless, employees have no other way to know whether the system's operating as it should or whether there is an N₂ leak. 

Oxygen monitors from PureAire use zirconium oxide sensors, which provide reliable service for 10+ years. To learn more about PureAire products, please visit www.Pureairemonitoring.com.

http://www.bbc.com/news/magazine-19870668

Neon Gas and Where it is Used. PureAire Oxygen Deficiency Monitors for Safety and Why a Monitor May be Required?

Neon gas has a range of uses in industry, including in the popular business signs advertising stores as open. Explore some of the less well-known ways to use neon and learn how use of the gas may require installation of an oxygen deficiency monitor to protect worker safety.  

Uses for Neon Gas

Neon gas can be filtered from helium using activated charcoal in a low temperature environment, or through the selective adsorption method. Once filtered out, neon can be used in the manufacturing of television tubes, plasma screens, and more. 

Ne or neon gas is used for advertising signs, as are other noble gases. Neon is also used for television tubes, plasma screens, wave meter tubes, inside lightning arresters, and with high-voltage indicators.
The gas itself has no color until an electric charge is applied that alters the structure of the Ne molecules. Neon gas only produces a reddish orange color light, so other inert gases are used to make other colors. In plasma screens, individual neon lights interact with phosphors within the screen to product the vibrant colors. This interaction allows neon to make other colors. 

In its liquid form, neon is extremely cold, and can act as a stronger refrigerant than liquid hydrogen or helium. Thus, the gas can be converted to liquid for use in cryogenic health tanks or other applications. There are potential cryonics applications for neon as well. 

In recent years, noble gases including neon have been used to detect fracking leaks. Neon can be tracked as it moved, illustrating the path of leaked methane from the frack site. Neon is a good choice for this purpose since it will not interact with other natural elements. 

As one of the inert gases, neon has a low environmental impact. The substance cannot react with other substances in the environment, which could pose harm. Neon is naturally found in the earth's environment in relatively low concentrations.

Neon gas itself has no color or odor naturally. The noble gas could seep into the environment in a manufacturing leak without anyone knowing what had happened. 

How an Oxygen Deficiency Monitor Can Protect Workers From Neon Gas Danger

Like other inert gases, neon can act as an asphyxiant. This means that, if Ne leaks into the air, it begins to displace oxygen in the air. As oxygen levels fall, workers can experience confusion and respiratory problems. If employees do not evacuate in time, they can lose consciousness and die of asphyxiation from the lack of oxygen in the air. In extreme cases, this can happen in a matter of minutes before staff even have time to reach safety. 

Since workers cannot see or smell the gas, they need a way to know when they are in danger of asphyxiation. Installing an oxygen monitor is one of these easiest ways to protect employees and provide early warning. 
A wall-mounted O₂ deficiency monitor continually checks the levels of oxygen in the air, to protect employee health. The monitor stays silent when everything is normal. As soon as oxygen levels fall below the threshold set by OSHA, the monitor will sound an alarm and flash colored lights to provide staff with clear notification. Workers can then evacuate before oxygen levels fall so low that they experience respiratory problems. 
PureAire offers an O₂ monitor built to withstand 10 years of use with no maintenance once it is installed. Oxygen monitors from PureAire contain zirconium sensors, which are accurate, efficient, and long-lasting. Simply by installing the right O2 monitor, businesses can protect their workers in environments where a noble gas is used. 

To learn more about the oxygen monitors PureAire offers, please visit www.pureairemonitoring.com.

Source

http://www.livescience.com/28811-neon.html

Are You An OLED Display Manufacturer? Why PureAire Monitoring Systems May Be Your Next Partner

OLED -- organic LED -- is a top desired feature in smartphones, yet manufacturers do not have the production capacity needed to meet industry demands. Since OLED devices have stronger contrast, a faster response time, a better quality, and a lower cost, there are many reasons for consumers as well as manufacturers to embrace this trend. To build capacity needed to product OLED screens for smartphones without sacrificing employee safety, semiconductor plants need two devices: An oxygen analyzer and an oxygen monitor. 

OLED Manufacturing and its Risks 

A good display is one of the strongest motivators to purchase a device, such as a television or a smartphone. The superior quality the OLED devices deliver will be a major driver for consumers, if these screens can make it onto a wide array of device types.

Next-generation OLED screens can even curve or roll up, like a newspaper. Kateeva is a company worth noting, as they are advancing OLED displays with over 200 million raised since 2008, using their YIELDjet FLEX printing tools. Two years after its debut, Kateeva’s YIELDjet FLEX tool is the undisputed leader in the industry. Kateeva’s President & COO was named “Inventor of the Year” for 2016 by the Silicon Valley Intellectual Property Law Association.

At present, only a handful of smartphone screens come with an organic LED. Apple hopes to ship all iPhones with OLEDs by 2018, but some doubt that facilities will have enough production to meet demands. At present, there is only one producer, Samsung, who is on board to provide the OLED screens. 

Efficient OLEDs are made using either an inkjet printing process or a process known as organic vapor phase deposition (OVPD). In the OVPD process, an inert gas (usually nitrogen or N₂) is used as a "carrier gas" to transport the organics onto a substrate, where they can condense. Nitrogen is a popular choice because it is inexpensive, efficient, and reliable.

Nitrogen can be generated on-demand using a generator that distils air into its component parts. An oxygen analyzer can help ensure the purity of the nitrogen gas created by measuring trace amounts of oxygen in ppm. By using nitrogen as the carrier gas, manufacturers can reduce the cost associated with making OLED screens and decrease the time to production.

How an Oxygen Deficiency Monitor Protects OLED Employee Safety

Inert gases including N₂ do not react with other substances. If the N₂ used as a carrier gas were to seep out from the generator or from supply lines, it would start to deplete oxygen present in the atmosphere. Since nitrogen gas has no odor or color, staff would be unable to tell that a leak had occurred without something like an oxygen deficient monitor in place. 

Within minutes of a leak, room oxygen levels would fall to below the minimum acceptable levels for oxygen. When this happens, anyone in the room would begin to experience respiratory symptoms, including mental confusion, loss of consciousness, and asphyxiation due to lack of oxygen. Accidents involving oxygen depletion are usually fast, serious, and frequently fatal. 

An oxygen monitor is a low-cost, effective way to monitor levels of oxygen anywhere that inert gases such as nitrogen are used. A wall-mounted oxygen monitor tracks oxygen levels on a continual basis and sounds a loud alert should oxygen fall below the 19.5 percent oxygen threshold earmarked by OSHA, a threshold that provides employees ample time to evacuate before succumbing to symptoms of oxygen deficiency.
By installing an oxygen deficiency monitor anywhere nitrogen gases are used or nitrogen generators exist, manufacturers can safeguard their staff while taking advantage of efficiencies that allow cheaper manufacturing of OLEDs. 

PureAire offers an oxygen deficiency monitors with a zirconium sensor, which is capable of withstanding 10 years of continued use. Because these sensors are long-lasting, they offer a good value compared to other types of sensors on the market. By installing an oxygen monitor to safeguard staff and an oxygen analyzer to protect the purity of the nitrogen gas, manufacturers can build capacity needed to meet the demand for OLED screens.   


PureAire's sensors are reliable, effective, and easy to set up. Once installed, they require no calibration to work. These monitors work in temperature extremes and remain reliable even when adverse weather affects barometric pressure. Learn more about oxygen monitors and analyzers from PureAire at www.pureairemonitoring.com. 

Nitrogen Demand Increases for Semiconductor: How Safe Are You?

As users demand ever-smaller smartphones and better televisions, semiconductor manufacturing plants are tasked with developing new products faster and using new materials. Key to the continued success of the semiconductor industry are inert gases, which include nitrogen and argon. When used safely, both nitrogen and argon play a number of important roles within the semiconductor plant. Yet, these gases poses a health hazard for employees if a leak occurs. 

How and Why Nitrogen is used in Semiconductor Manufacturing Plants 

Nitrogen is used throughout the manufacturing process, from purging pumps to abatement. Nitrogen is also used in the process, especially now that fab size is growing. In a modern semiconductor manufacturing plant, as much as 50,000 cubic meters of nitrogen gas are used every hour. 

To meet this demand, semiconductor manufacturing plants are installing nitrogen generators onsite. Generators mean a cheap, efficient, and always-ready supply of nitrogen gas to supply production. 

As long as nitrogen gas is stored safely in the generator and used properly, there is no health risk. Yet if the generator or supply lines develop a leak, nitrogen gas can escape and deplete oxygen in the environment. Since nitrogen gas is both odorless and colorless, there is no way that staff can monitor their risk. 

Along with nitrogen, argon gas is used in semiconductor manufacturing, most notable as a sputtering gas. Like nitrogen, argon gas depletes oxygen from the environment. Like nitrogen, the gas has no color or odor. In a closed area, the gas can deplete oxygen and cause respiratory problems and eventual suffocation. 

How an Oxygen Analyzer Can Protect Staff Working in a Semiconductor Manufacturing Plant 

If either nitrogen or argon were to leak into the plant, these inert gases would begin to deplete the levels of oxygen in the air. OSHA sets the oxygen threshold at 19.5 percent or less oxygen in the air. If oxygen levels fall below this, staff could suffer. 

When oxygen levels fall to OSHA's threshold, staff may show signs of confusion or fatigue. Since there are no warning signs that something is wrong, staff can fall unconscious before they can escape the oxygen deficient environment. Once unconscious, they asphyxiate. 

It is critical for any workplace that uses these inert gases, including semiconductor plants, to monitor levels of oxygen in the air and alert workers if the ambient oxygen levels fall to the OSHA threshold. 

By installing an oxygen monitor and an oxygen analyzer anywhere inert gases are used, manufacturers can protect the safety of their workers through continual oxygen monitoring and fast alert if oxygen levels fall. A wall-mounted oxygen monitor scans the atmosphere and measures the amount of oxygen from 0 to 25 percent, well above the safety threshold. As long as there is enough oxygen in the air -- which there will be as long as there is no inert gas leak -- the oxygen monitor will remain silent. 

When oxygen levels fall to the OSHA threshold, the oxygen monitor will flash lights and sound an alarm, providing instant notification to workers. Staff can take notice and evacuate before negative health outcomes occur. 

An oxygen analyzer measures the level of oxygen present in gas produced via nitrogen generator to ensure the purity of the gas for use in manufacturing. Oxygen analyzers are ideal for low level analysis and can measure from 0 to 1,000 ppm. Workers can check oxygen levels at a glance and ensure the nitrogen generator is working properly. When combined with the oxygen monitor for safety, the oxygen analyzer streamlines and safeguards the semiconductor manufacturing process. 

PureAire offers industry leading oxygen monitors and oxygen analyzers that can last for up to 10 years after installation with no maintenance needed. These products offer worker protection and peace of mind for manufacturers who want to remain cutting edge in their industry. Learn more about PureAire's products at https://www.pureairemonitoring.com.