Thursday, December 8, 2011
PureAire’s Methyl Bromide Monitor Gains Exposure from the Department of Pesticide Regulation
There has been an increased awareness for methyl bromide safety in the past few months. Over a year ago two employees at a cold storage warehouse got physically ill from high levels of methyl bromide. The Ch3br gas was off gassing from the products causing a higher than safe level for the employees. Commodities being shipped from overseas must be fumigated in ports, or warehouses upon arrival to kill off any pests. California DPR has announced PureAire can be used as a real time Methyl Bromide Gas Monitor for safety in the workplace.
PureAire is the only EPA compliant Ch3Br monitor for fumigation safety. The Aircheck monitor is in real time, monitoring 24/7, and capable of detecting low 0.3 parts-per-million. PureAire's president, Al Carrino saw a demand for a low methyl bromide monitor. From his complex understanding of Methyl Bromide, he was determined to get the EPA, DPR, and the State of California to recognize PureAire's monitor.
Effective June 25, 2008, the Department of Pesticide Regulation of the California EPA has added a real time remote sensor monitor for the detection of Ch3Br by PureAire Monitoring Systems, in addition to colorimetric detector tubes. The PureAire Air Check Advantage Continuous Methyl Bromide Monitor can now be used to monitor enclosed areas, including warehouse fumigation clearing and commodity fumigation clearing1. Some commodities include grapes, walnuts, strawberries, and asparagus.
The PureAire Air Check Advantage Monitoring System detects and measures methyl bromide in a range of 0 to 10 ppm. Installation of the Ch3Br monitor is simple. For warehouses storing commodities, the Ch3Br monitor should wall mounted at eye level or for easy access. The monitor has a sample inlet and sample outlet port. The monitor can sample directly from the monitors inlet, or a sample tube can be installed increasing the sampling distance to 100 ft.
The Ch3Br monitor is designed for fumigation clearing chambers and storage areas. The monitor is ideal for providing worker protection at orchards, for growers, international airports, and seaports where commodities are fumigated before shipping.
Functions include:
1. 0.3 PPM detectable limit, 0-10 PPM sensor range
2. A local back-light digital display
3. 4-20 mA signal for controller or fire panels
4. 2 User selectable relays or alarms
5. Capable of turning on/off horns and strobes
6. Test and reset modes
7. Sampling length of 100ft
This monitor can replace the use of colorimetric tubes, and provide employees with a "Real Time," monitor. If you have anymore questions please call 1-888-788-8050. U.S. Website: http://www.PureAireMonitoring.com.
Wednesday, December 7, 2011
PureAire Monitoring Systems Grows their Sales Once Again
In the past year PureAire Monitoring Systems has grown at the rate of 50%. PureAire is known for the manufacturing and selling of safety gas monitors. There monitors are used in environments such as laboratories, pharmaceutical industries, medical laboratories, universities, nitrogen manufacturing plants, cold storage warehouses, and other various areas where air conditions can be at risk PureAire started in 1997 and has continued to develop new gas monitors for safety in the workplace. They are continuing to push the envelope of technology with the help of well esteemed engineers, and president.
One monitor that has helped attribute to PureAire’s sales is their Oxygen Monitor. Known as the Aircheck TX-1100-DRA, this monitor uses a 10+ year sensor technology which has left their competitors in the dust. Being sold since the 1970’s by their affiliate company Bionics, PureAire re-engineered the monitor and complimented the sensor technology, ultimately increasing the accuracy and stability. The newly developed 3.05 revision software update has even outperformed their previous tests. In addition to their newly designed software, there is a built in horn/strobe, LCD backlight digital display, 2 user selectable alarms, and a 4-20 mA signal for control panels. There hassle free Oxygen Monitor is being used at the most prestigious Universities such as Harvard, UCSB, UC Berkeley, and Cornell.
In addition to, a more recent sought out monitor has been their Methyl Bromide Monitor for fumigation. A monitor being sold for many years, also received an update in their software and hardware. Since 2008, PureAire received a EPA, DPR, and USDA compliancy for their safety methyl bromide monitor in the workplace. PureAire is the only company that makes a 24/7 supervised Ch3Br monitor used to measure in the ppm. Repeatable and reliable tests prove the monitor can be used to measure less than 1ppm. Low.4ppm or 400 ppb can be measured in areas containing methyl bromide gas. Before PureAire’s monitor, sampling tubes (Draeger or Kitagawa Colorimetric Tubes) were the only option to take a real time sample. To measure an air sample, an employee would need to take it him/herself. This ultimately brought up a safety concern for the employees, especially if there is a high concentration of methyl bromide in the area.
Primary areas where PureAire’s methyl bromide monitors are be sold are in cold storage facilities housing pre-fumigated produce before distribution throughout the country. For example, grapes are being shipped abroad to US ports. Before they are distributed to local grocery stores they are fumigated with Ch3Br in high concentrations eliminating pests, etc. Fumigation also ensures the produce is safer before being sold to consumers. The monitors are also used for the residual fumigation of walnuts, asparagus, avocados, apples, and strawberries
Also, PureAire is working on a multi point methyl bromide monitor which is in pre-production stages, hoping to be released to the public in the first quarter for 2012. This will be a 4 channel monitor for clients interested in monitoring 4 separate areas. As PureAire continues to grow, so will the development of newer and edgier products.
You can contact PureAire at www.PureAireMonitoring.com, and www.MonitorOxygen.com. PureAire’s toll free number is 1-888-788-8050, or 1-847-726-6000.
One monitor that has helped attribute to PureAire’s sales is their Oxygen Monitor. Known as the Aircheck TX-1100-DRA, this monitor uses a 10+ year sensor technology which has left their competitors in the dust. Being sold since the 1970’s by their affiliate company Bionics, PureAire re-engineered the monitor and complimented the sensor technology, ultimately increasing the accuracy and stability. The newly developed 3.05 revision software update has even outperformed their previous tests. In addition to their newly designed software, there is a built in horn/strobe, LCD backlight digital display, 2 user selectable alarms, and a 4-20 mA signal for control panels. There hassle free Oxygen Monitor is being used at the most prestigious Universities such as Harvard, UCSB, UC Berkeley, and Cornell.
In addition to, a more recent sought out monitor has been their Methyl Bromide Monitor for fumigation. A monitor being sold for many years, also received an update in their software and hardware. Since 2008, PureAire received a EPA, DPR, and USDA compliancy for their safety methyl bromide monitor in the workplace. PureAire is the only company that makes a 24/7 supervised Ch3Br monitor used to measure in the ppm. Repeatable and reliable tests prove the monitor can be used to measure less than 1ppm. Low.4ppm or 400 ppb can be measured in areas containing methyl bromide gas. Before PureAire’s monitor, sampling tubes (Draeger or Kitagawa Colorimetric Tubes) were the only option to take a real time sample. To measure an air sample, an employee would need to take it him/herself. This ultimately brought up a safety concern for the employees, especially if there is a high concentration of methyl bromide in the area.
Primary areas where PureAire’s methyl bromide monitors are be sold are in cold storage facilities housing pre-fumigated produce before distribution throughout the country. For example, grapes are being shipped abroad to US ports. Before they are distributed to local grocery stores they are fumigated with Ch3Br in high concentrations eliminating pests, etc. Fumigation also ensures the produce is safer before being sold to consumers. The monitors are also used for the residual fumigation of walnuts, asparagus, avocados, apples, and strawberries
Also, PureAire is working on a multi point methyl bromide monitor which is in pre-production stages, hoping to be released to the public in the first quarter for 2012. This will be a 4 channel monitor for clients interested in monitoring 4 separate areas. As PureAire continues to grow, so will the development of newer and edgier products.
You can contact PureAire at www.PureAireMonitoring.com, and www.MonitorOxygen.com. PureAire’s toll free number is 1-888-788-8050, or 1-847-726-6000.
Subscribe to:
Posts (Atom)